ZU19/ZU17/ZU11 3U VPX Plug-In Module

ZU19/ZU17/ZU11 3U VPX Plug-In Module

iW-RainboW-G35V®

  • AMD Xilinx’s ZU19/17/11EG Zynq Ultrascale+ MPSoC
  • 64bit, 4GB PS DDR4 RAM with ECC (Upgradable)
  • Dual 64 bit, 8GB PL DDR4 RAM (Upgradable)
  • 8GB eMMC Flash (Upgradable)
  • 3U VPX Connector (P0+P1A & P1B+P2A)
  • 8 Optical transceivers through MT Ferrule Connector (P2B)
Categories: ,

SPECIFICATION

On-Board Features

ZU19/ZU17/ZU11 - Zynq Ultrascale+ MPSoC

Processing System (PS/Processor)

  • Quad/Dual Arm Cortex-A53 @1.5GHz, Dual Cortex-R5 @600MHz
  • Arm Mali-400MP2 GPU @677MHz

Programming Logic (PL/FPGA)

  • Up to 1143K Logic cells & 522K LUTs

 

RAM Memory

Processing System (PS):

  • 64bit, 8GB DDR4 RAM with ECC

Programmable Logic (PL/FPGA):

  • Dual 64bit, 8GB DDR4 RAM (Expandable up to 16GB)

 

On Board Flash

8GB eMMC Flash for Boot & Storage (Expandable up to 128GB)

 

3U VPX Backplane Features

3U VPX Connector (P0+P1A)
  • DS01[3:0] – 1G/2.5G/10G Ethernet or PCIe Gen3 (Using GTH Transceivers @ Up to 16Gbps/Lane)
  • DP01[3:0] – 1G/2.5G/10G Ethernet or PCIe Gen3 (Using GTH Transceivers @ Up to 16Gbps/Lane)
  • 1 REF Clock & 1 AUX Clock Differential Input Pair
  • JTAG, I2C x 2
  • Control Signals
  • 12V Power Pins

 

3U VPX Connector (P1B+P2A)
  • DP02[3:0] – 1G/2.5G/10G Ethernet (Using GTH Transceivers @ Up to 16Gbps/Lane)
  • DP03[3:0] – 1G/2.5G/10G Ethernet (Using GTH Transceivers @ Up to 16Gbps/Lane)
  • CPutp[6:0] – 1G/2.5G/10G/25G Ethernet (Using GTY Transceivers @ Up to 25Gbps/Lane)
  • CSutp01 – 1G/2.5G/10G/25G Ethernet (Using GTY Transceivers @ Up to 25Gbps/Lane)
  • MP01 and MP02
  • Maskable Reset

 

MT Ferrule Optical Connector (P2B)
  • 8 Fiber Optical Transceiver (4 x 2) Up to 28.125Gbps (Through two FireFly Connector)

3U VPX Front Panel Features

  • USB3.0 & USB 2.0 through USB Type-C Connector x 1
  • 3-Pin Debug UART Header x 1
  • 4K Display Port through USB Type-C Connector x 1
  • 10/100/1000Mbps Ethernet through 9 Pin Header x 1

Other On-Board Features

  • PCIe Gen2 x 1 through M.2(Key-M) Connector x 1
  • Temperature Sensor
  • Elapse Time Counter
  • Quad User LEDs
  • Reset Switch

General Specification

Module Profile

MOD3-SWH-4F1U7U1J-16.8.7-n

Slot Profile

SLT3-SWH-4F1U7U1J-14.8.7-n

Power Supply

+12VDC +/- 5% Input from VPX Connector

Form Factor

3U VPX (160mm X 100mm)

THERMAL SOLUTIONS

For any highly integrated FPGA VPX Plug-in Module, thermal design is a very important factor. iWave supports a VITA 65.0 compliant 3U heat spreader.

Copyright © 2022 iWave Systems Technologies Pvt. Ltd.