SDIO Slave Controller

SDIO Slave Controller

SDIO Slave controller facilitates the design of SDIO cards and reduces the development time. By using this IP core, customers no longer need to spend time on handling the SD bus protocol since such function is provided by the core

Downloads

Xilinx Evaluation Kit

Intel Evaluation Kit

Mircochip Evaluation Kit

Specification

    • Compliant with SD Physical Specification Version 3.00 and SDIO Specification Version 3.00
    • Supports 1-bit and 4bit SD modes
    • Supports SDIO Interrupt feature
    • Supports all mandatory SDIO Commands/Response types
      • SPI Mode: CMD0, CMD5, CMD52, CMD53, CMD59
      • SD Mode: CMD0, CMD3, CMD5, CMD7, CMD52, CMD53
    • CRC7 checking/generation for Command/Response
    • CRC16 checking/generation for Data transfer
    • Supports SDR12, SDR25, SDR50 and SDR104** Mode of operation
    • Supports only 1.8V or 3.3V SDIO Voltage. SDIO voltage switching is not supported
    • Data Transfer in Multi Byte and Multi Block mode using CMD53
    • 8-bit Wishbone interface with constant burst, Wishbone Specification- B3 supported
    • Function0 and Function1 supported
    • SDIO only implementation, Combo card features are not supported
    • Optional Code Storage Area (CSA) is not supported
    • Suspend/Resume Features not supported
    • DDR50 mode is not supported

    ** IP Supports SDR50 and SDR104 mode. Please contact us to check the SDR50 and SDR104 mode support in target device.

HIGHLIGHTS

  • Compliant with SD Physical Specification Version 3.00 and SDIO Specification Version 3.00
  • Controller handles SD bus protocol on the card interface and provides simplified interface to user logic
  • Controller handle all the housekeeping tasks by itself without user logic intervention

Copyright © 2020 iWave Systems Technologies Pvt. Ltd.