Zynq UltraScale+ MPSoC ZU15/ZU9/ZU6

Zynq UltraScale+ MPSoC ZU15/ZU9/ZU6

iW-RainboW-G65M®

  • Zynq™ UltraScale+™ MPSoC family Compatible with ZU15/ZU9/ZU6 EG/CG devices
  • 4GB DDR4 for PS with ECC, 2GB DDR4 for PL & 32GB eMMC Flash
  • 16 Channels GTH Transceivers up to 16.375Gbps
  • 4 Channels GTR Transceivers up to 6Gbps
  • 48 LVDS Pairs/ 96 SE IOs, 46 SE IOs
  • Up to 746.550K Logic cells & 341.280K LUTs

On Board Features:

SoC

ZU15EG ZU9/6 EG/CG
Processing System (PS/Processor)

  • Quad-core ARM Cortex-A53 MPCore @1.5GHz
  • Dual-core ARM Cortex-R5 MPCore @600MHz
  • Arm Mali-400MP2 GPU

Programming Logic (PL/FPGA)

  • Up to 746.550K Logic cells & 341.280K LUTs
  • High Speed GTH Transceivers x 16 (Up to 16.375Gb/s)
RAM Memory

PS: 64bit, 4GB DDR4 RAM with ECC (Expandable up to 8GB)
PL/FPGA: 16bit, 2GB DDR4 RAM

On Board Flash

32GB eMMC Flash for boot & storage (expandable up to 128GB)
EEPROM (2Kbit)

Other Interfaces

Gigabit Ethernet PHY Transceiver (PTP supported)
USB2.0 PHY Transceiver
6 Output programable clock synthesizer

240pin High-Speed Board to Board Connector 1 Interfaces

From PS Block
  • PS GTR Transceiver Lanes x 2 (Up to 6.0Gb/s)
  • GEM3 RGMII Interface or ULPI Interface x 1
  • CAN interface x 2
From PL Block
  • High Speed GTH Transceiver Lanes x 12 (Up to 16.375Gbps)
  • HD Bank IOs – Up to 46 Single Ended IO’s
  • ADC Input pins- Up to 20 Single Ended IO’s from HD Banks

240pin High-Speed Board to Board Connector 2 Interfaces

From PS Block
  • PS GTR Transceiver Lanes x 2 (Up to 6.0Gb/s)
  • Gigabit Ethernet x 1 Port (through On-SOM Gigabit Ethernet PHY)
  • USB2.0 OTG x 1 Port (through On-SOM USB2.0 transceiver)
  • SD (4bit) x 1
  • Debug UART & Data UART x 1
  • SPI x 1
  • I2C x 2 Port
  • JTAG x 1
From PL Block
  • High Speed GTH Transceiver Lanes x 4 (Up to 16.375Gbps)
  • HP Bank IOs – 48 LVDS/96 Single Ended IO’s
  • ADC Input pins – Up to 32 Differential/Single Ended from HP Banks

Software Features

  • Multi OS Support: Linux, Ubuntu, VxWorks, PYNQ, Baremetal
  • Security: Secure boot, TPM, watchdog, multiboot
  • Docker & QEMU support
  • Dynamic FPGA configuration
  • Flexible boot options
  • BIST, 100G & video support

General Features

Power Input

5VDC +/- 5% input from B2B Connector2

Form Factor

95mm X 75mm(OREN)

BSP Support

Linux BSP: Yocto 24.2
BareMetal BSP: Vivado 24.2

Environment Specification

REACH & RoHS3 Compliant

Compliance

CE*

*Under Progress

Notes:
*Under Progress

DEVELOPMENT KIT

ZU15EG ZU9/6 EG/CG Devkit image
  • 10G Ethernet through SFP+ Connector
  • 3G SDI Video IN through HD BNC Connector
  • 3G SDI Video OUT through HD BNC Connector
  • Dual FMC High Pin Count (HPC) Connector
  • DP1.2a Display Port Connector
  • PCIe Gen2 x4 Connector
  • M.2 SATA 3.1 Connector
  • USB 3.0 OTG through TypeC Connector
  • Dual Gigabit Ethernet through RJ45MagJack
  • USB2.0 OTG through MicroAB Connector
  • Standard SD Connector
  • CAN Header
  • JTAG Header
  • Debug MicroAB connector
  • Dual PMOD Connector
  • RTC Coin Cell Holder
  • Operating Temperature: -20°C to +85°C
  • Form Factor: 130mm x 140mm

Custom Design Sevices

iWave provides end-to-end ODM services, from concept to production, leveraging our in-house expertise in hardware design, software development, FPGA design, and mechanical enclosure design. The FPGA expertise at iWave includes RTL, high speed bus interface and transceivers, storage, video, networking, and high-speed ADC/DAC with the entire product lifecycle, from initial concept to mass production and ongoing support.

RELATED VIDEOS

Play Video
Play Video
Play Video

Copyright © 2022 iWave Systems Technologies Pvt. Ltd.