Documents

Design Support

Software

BUY NOW

Documents

Design Support

Software

BUY NOW

Zynq™ UltraScale+™ XQ RFSoC 49DR – MIL Grade

Zynq™ UltraScale+™ XQ RFSoC 49DR – MIL Grade

iG-G42M-ML®

  • Zynq™ UltraScale+™ XQ RFSoC 49DR with FSRF1760 Package
  • 64Bit 8GB DDR4 with ECC for PS and 64Bit 8GB DDR4 for PL
  • 32GB eMMC and 256MB QSPI Configuration flash
  • 16x High Speed 14-bit ADC Channel up to 2.5Gsps
  • 16x High Speed 14-bit DAC Channel up to 9.85Gsps
  • 16x GTY transceivers up to 28.21Gbps
  • Up to 930K Logic cells
Categories: ,

On Module Features:

RFSoC XQ-ZU49DR
  • Processing System (PS)
    • Quad-core Arm Cortex-A53 up to 1.3 GHz
    • Dual-core Arm Cortex-R5F embedded processors up to 533MHz.

    Programmable Logic (PL)

    • Up to 930K Logic elements
    • 16x transceivers up to 28.21Gbps
Memory & Storage
  • 8GB DDR4 with ECC for PS
  • 8GB DDR4 for PL
  • 32GB eMMC Flash
  • 256MB QSPI and EEPROM

Board to Board Connector1 Interfaces(400pin)

ADC: 16 x ADC Channels up to 2.5Gsps
DAC: 16 x DAC Channels up to 9.85Gsps
PL IOs: PL IOs – 192 IOs

  • HP Bank IOs – up to 72LVDS/144SE
  • HD Bank IOs – up to 24LVDS/48SE

Board to Board Connector2 Interfaces(400pin)

From PL Block
  • 16 x PL-GTY High Speed Transceivers (up to 28.21Gbps)
  • PL Control Signal
From PS Block
  • Gigabit Ethernet x 1 Port (through On-SOM Gigabit Ethernet PHY)
  • USB 2.0 OTG x 1 (through On-SOM USB2.0 transceiver – Optional)
  • SPI/QSPI X 1 Port (Optional)
  • CAN x 1, I2C x 2, SD x 1
  • Debug UART x 1, Data UART x 1
  • PS JTAG
  • RGMII Interface or ULPI Interface x 1
  • PS -GTR High speed Transceivers x 4 (upto 6Gbps)
  • PS-Control Signals
  • SYSMON(Optional)
Clock signals
  • 10MHz Clock IN, SYS_SYNC_CLK IN, (1PPS IN- Optional)
  • 10 MHz Clock out, 1PPS Clock Out (Optional).

General Features

Power Input

12V through B2B Connector

Form Factor

82mm x 100mm (BRYNc)

BSP Support

Linux BSP- Linux/Vivado 2024.2

Operating Temperature

-40°C to 105°C

Environment Specification

REACH & RoHS3 Compliant

Custom Design Sevices

iWave provides end-to-end ODM services, from concept to production, leveraging our in-house expertise in hardware design, software development, FPGA design, and mechanical enclosure design. The FPGA expertise at iWave includes RTL, high speed bus interface and transceivers, storage, video, networking, and high-speed ADC/DAC with the entire product lifecycle, from initial concept to mass production and ongoing support.

iWave's Custom Design Services

Product Design Process

Certification & Qualification

Product Lifecycle Management

Mechanical Services

RELATED VIDEOS

Play Video about RFSoC Multi board video banner image

Achieving Multi-Board Synchronization with ZU49DR RFSoC

Play Video about Versal YouTube Thumbelina

Inside the Industry’s Smallest Versal AI Edge SoM: Features and Development Kit Explained

Play Video about FPGA YouTube Thumbelina

Explore iWave’s FPGA ODM Solutions and Expertise

Related products

img

ZU7/ZU5/ZU4- Zynq UltraScale+ SOM

Supports Zynq UltraScale+ MPSoC EV family of devices & ideal for video processing systems

Learn More
img

ZU19/ZU17/ZU11- Zynq UltraScale+ SOM

The SoM is compatible with ZU19/ZU17/ZU11 devices and supports up to 1.1M logic elements

Learn More
img

ZU48/ZU47/ZU43/ZU28/ZU27/ZU25DR - Zynq UltraScale+ RFSoC SOM

Powered by Zynq UltraScale+ RFSoC with support for SD-FEC Block and ultra low-noise programmable RF PLL

Learn More
img

Zynq UltraScale+ MPSoC ZU5/ZU4/ZU3T/ZU3/ZU2/ZU1 SOM

Comes with improved features like 12.5Gbps GTH transceivers, high IO-to-logic density

Learn More

Copyright © 2022 iWave Systems Technologies Pvt. Ltd.

Linkedin-in Youtube Facebook-f