ZU48/47/43/28/27/25DR RFSoC ADC & DAC PCIe Card

ZU48/47/43/28/27/25DR RFSoC ADC & DAC PCIe Card

iW-RainboW-G60P®

  • AMD Zynq™ Ultrascale+™ RFSoC ZU48/ZU47/ZU43/ZU28/ZU27/ZU25DR
  • Up to 8 DAC channels through SMA connector with 9.85Gsps
  • Up to 8 ADC channels through SMA connector with 5Gsps
  • Up to 8 integrated SD-FEC
  • PL GTY High Speed Transceivers x 16 @28.21Gbps
  • 3/4 Length PCIe Gen3 x 8 Host Interface
Categories: ,

SoC
  • Zynq™ UltraScale+™ RFSoC ZU48/ZU47/ZU43/ZU28/ZU27/ZU25DR Processing System (PS/Processor)
    • Quad/Dual Arm Cortex-A53 @1.3GHz
    • Dual Cortex-R5F @533MHz
  • PL GTY High Speed Transceivers x 16 @28.21Gbps
RAM Memory
  • 8GB, 64bit DDR4 RAM with ECC for PS
  • 8GB, 64bit DDR4 RAM for PL
Storage
  • 256MB QSPI Flash for Booting
  • 32GB eMMC Flash for Storage
  • Micro SD slot from PS
  • M.2 NVMe Slot from PS with PCIe Gen2 x2 or x4 interface
ADC Channels (Up to x8)
  • 1 x Right Angle SMA connector on Front Panel with Balun (BW 10MHz to 3GHz)
  • Up to 3 x Right Angle SMA connectors on Front Panel with Balun (BW 3.1GHz to 5.8GHz)
  • 1 x Straight SMA connectors with Balun (BW 10MHz to 3GHz)
  • Up to 3x Straight SMA connectors with Balun (BW 3.1GHz to 5.8GHz)
DAC Channels (Up to x8)
  • 1 x Right Angle SMA connector on Front Panel with Balun (BW 10MHz to 3GHz)
  • Up to 3 x Right Angle SMA connectors on Front Panel with Balun (BW 3.1GHz to 5.8GHz)
  • 1 x Straight SMA connectors with Balun (BW 10MHz to 3GHz)
  • Up to 3x Straight SMA connectors with Balun (BW 3.1GHz to 5.8GHz)
Clock & PLL
  • Integrated Configurable ultra-low noise PLL for ADC & DAC
  • Fully Configurable Clock Synthesizer with SyncE and PTP support
  • 4 x SMA Straight connector for clocks (10Mhz IN and OUT, 1PPS IN, Synchronous Clock IN)
Host Interface
  • Up to PCIe Gen4 x 8 Edge Connector
Expansion
  • FMC+ High serial Pin connector (HSPC) Connector
  • 8 channel GTY Transceivers @ up to 28.21Gbps
  • 2 GTY Reference Clock
  • 48 LVDS IOs/96 Single ended (SE) IOs from PL Banks
Others
  • 2 x RJ45 1GbE Ethernet Port on Back Panel from PS
  • Display port through USB-Type-C connector from PS
  • RTC Battery Header
Debug
  • Integrated JTAG Programming/Emulator Module
  • USB TypeC Debug Port on Front Panel for PS Debug UART, PL DATA UART and JTAG
Thermal
  • Fan sink (by default)
Operating Temperature
  • -40°C to +85°C (Industrial)
Power
  • 75W max from PCIe x 8 Host
  • 8Pin ATX Power Connector in Back Panel Power Droop Sharing (to maximize power when needed)
  • Power dissipation is application dependent
Form Factor
  • 254mm x 125.31mm (¾ Length PCIe*)
Compliance
  • RoHS Compliant
  • REACH Compliant
  • CE*
* Under Progress

Custom Design Sevices

iWave provides end-to-end ODM services, from concept to production, leveraging our in-house expertise in hardware design, software development, FPGA design, and mechanical enclosure design. The FPGA expertise at iWave includes RTL, high speed bus interface and transceivers, storage, video, networking, and high-speed ADC/DAC with the entire product lifecycle, from initial concept to mass production and ongoing support.

RELATED VIDEOS

Play Video about RFSoC Multi board video banner image
Play Video about FPGA YouTube Thumbelina

Copyright © 2022 iWave Systems Technologies Pvt. Ltd.