Virtex UltraScale+ SOM

Virtex UltraScale+ SOM

iW-RainboW-G52M®

  • Xilinx Virtex UltraScale+ FPGA with B2104 Package
  • Compatible with VU13P, VU11P, VU9P, VU7P, VU5P, VU160, VU190, VU125, VU080, VU095, KU19P, KU095, KU115 device with B2104 package
  • Dual 4GB DDR4 (64-Bit) with ECC for FPGA
  • 2GB DDR4 for FPGA (32bit)
  • 76 channels of GTY transceivers up to 32Gbps
  • 120 LVDS Pairs and 240 SE FPGA IOs
  • OSM module with Size-M
  • Industrial Grade Availability
  • 10+ Years long term support

Virtex UltraScale+ FPGA features

VU13P SoC Features
  • Virtex UltraScale+ FPGA with B2104 Package
  • Compatible with Virtex UltraScale+ VU13P, VU11P, VU9P, VU7P, VU5P, Kintex UltraScale+ KU19P, Virtex UltraScale VU080, VU095, VU125, VU160, VU190 and Kintex UltraScale KU095, KU115 devices
  • Up to 3,780K Logic cells & 1,728K LUTs
  • Gen3 x16/ Gen4x8 Integrated PCIe block
  • 100G Ethernet MAC cores for high-speed connectivity
PMIC
  • Dual Dialog’s DA9062 PMIC
Memory Interfaces
  • Dual 64bit, 4GB DDR4 with ECC for FPGA
  • 32bit, 2GB DDR4 for FPGA
  • 128MB QSPI Flash
  • 512KB SRAM via SPI
  • 4Kbit EEPROM
OSM Features
  • Dual 64-bit Arm Cortex-A72 microprocessor at 2.0 GHz
  • OSM module with Size-M
  • 32bit 2GB LPDDR (Expandable)
  • 16GB eMMC Flash
  • 4 SerDes (PCIe Gen3/ USB3.0/SGMII) interfaces
  • Supports UART, CAN, SD, RGMII, JTAG and I2C
FPGA to OSM Interfaces
  • PCIe x2 Gen3
  • RGMII x1
  • SPI x1
  • UART x1(optional)
Other Interfaces
  • TPM2.0 module
  • Temperature Sensor
  • Clock Synthesizer for On-SOM Clocks and FPGA GTY
  • 10G Ethernet PHY Transceiver
  • 2:1 JTAG MUX switch
  • Fan Header

Board to Board Connector1 Interfaces (400pin)

  • 120 LVDS Pairs and 240 SE FPGA IOs

Board to Board Connector2 Interfaces (400pin)

From VU13P Interface
  • FPGA GTY Transceiver x 28 up to 32Gbps
From OSM Interface
  • USB3.0 x 1
  • USB2.0 x1
  • Debug UART x 1 Port
  • UART x 1 Port
  • I2C x 2 Ports
  • JTAG x1 Port
  • SD x1 Port
  • RGMII Interface x1
  • 10G Ethernet x 1 Port (through On-SOM Ethernet PHY)

Board to Board Connector3 Interfaces (400pin)

  • FPGA GTY Transceiver x 48 up to 32Gbps1

General Features:

Power Input

12V through B2B Connector

Form Factor

90mm x 120mm

BSP Support

Linux

Operating Temperature

-40°C to +85°C

Environment Specification

REACH & RoHS3 Compliant

1 Two FPGA GTY transceiver channels are muxed with PCIe interface between FPGA and OSM

Need help with your FPGA and Product Design?

THERMAL SOLUTIONS

For any highly integrated System on Modules, thermal design is very important factor. iWave Supports Fan Sink solution for Virtex UltraScale+ SOM.

RELATED VIDEOS

Copyright © 2022 iWave Systems Technologies Pvt. Ltd.