i.MX 8M Quad/QuadLite/Dual SMARC SOM

i.MX 8M Quad/QuadLite/Dual SMARC SOM

iW-RainboW-G33M®

  • i.MX 8M Q/QL/D CPU with 64-bit ARMv8 Architecture
  • Up to 4GB LPDDR4 Memory
  • 10+ years of Product Longevity Program
  • IEEE 802.11a/b/g/n/ac/ax Wi-Fi & Bluetooth 5.0
  • Dual 1000/100/10 Mbps Ethernet
  • SMARC v2.1 Compatible SOM
MOUSER

Downloads

Specification

On Module Feature:

CPU

i.MX 8M Quad: 4 x Cortex-A53, 1 x Cortex-M4, GPU & VPU
i.MX 8M QuadLite: 4 x Cortex-A53, 1 x Cortex-M4 & GPU
i.MX 8M Dual: 2 x Cortex-A53 , 1 x Cortex-M4, GPU & VPU

Memory & Storage

LPDDR4 – 2GB (Expandable up to 4GB )
eMMC Flash – 8GB (Expandable up to 128GB)
QSPI Flash (Optional)
Micro SD slot (Optional)

Other

IEEE 802.11a/b/g/n/ac/ax Wi-Fi & Bluetooth 5.0 (ax is optional)

Edge Connector Features:

  • Gigabit Ethernet Jack x2 (AVB support on one port)
  • PCIe 2.0 x2 (2nd lane is optional shared with 2nd Ethernet Port)
  • USB 2.0 Host x4
  • USB 3.0 Host x1 (Not including 2.0 lines)
  • USB 3.0 OTG x1
  • SD 3.0 x1 (Optional)
  • HDMI 2.0a /DP 1.3 x1
  • 4 lane MIPI DSI/LVDS x1
  • 2 lane MIPI CSI0 x1
  • 4 lane MIPI CSI1 x1
  • CAN x2 (Optional)
  • SPI x1
  • QSPI x1
  • I2S x2
  • I2C x4
  • UART x4
  • SMARC GPIOs

Expansion Connector Features (Optional):

  • SAI (8 TX & 8 RX channels) x 1 Port
  • 2 lanes of MIPI CSI0 (No clock Lane)
  • 1 x Clock Differential Pair
  • GPIOs

OS Support:

  • Linux 4.14.98
  • Android Pie 9.0.0

General Features:

Power Input

5V, 2.5A through SMARC EDGE Connector

Form Factor

82mm x 50mm

Operating Temperature

-40°C to +85°C (Industrial)
0°C to +70°C (Commercial)

Environment Specification

REACH & RoHS3 Compliant

Note: Optional features are not supported in default configuration.

THERMAL SOLUTIONS

For any highly integrated System On Modules, thermal design is a very important factor. iWave Supports Heat Sink and Heat Spreader Solution for i.MX 8M SMARC SOM.

DEVELOPMENT KIT

i.MX8M_Dev_Kit
  • Gigabit Ethernet Jack x2
  • PCIe x1 or Mini PCIe or M.2 slot
  • USB 3.0 Type-A or Type-C
  • USB 2.0 Host Type-A x2
  • USB 2.0 OTG Type-micro AB x1 (optional)
  • Standard SD x1 (Optional)
  • HDMI 2.0 /DP1.3 x1
  • 5.5” 1080p MIPI DSI display with Capacitive Touch
  • 20pin LVDS Connector (Optional)
  • MIPI CSI Camera Connector
  • Audio In/Out Jack through I2S Codec x1
  • Full Function UART – 1 Port
  • RTC with backup battery
  • CAN Header x2 (Optional)
  • Debug UART through Micro USB Port

Copyright © 2020 iWave Systems Technologies Pvt. Ltd.