Versal RF

Versal RF

iW-RainboW-G80M®

  • Versal RF System on Module Compatible with VR1952, VR1902, VR1652, and VR1602 devices
  • Up to 2,473.8K Logic Cells & 1,130.88K LUTs for FPGA processing
  • RF input/output support up to 18GHz for wideband applications
  • Up to 16 ADC channels (32GSPS) for high-speed acquisition
  • Up to 16 DAC channels (16GSPS) for signal generation
  • PCIe Gen5 x4 via GTM2 transceivers for ultra-fast data transfer

On Module Features:

Versal™ RF

Processing System (PS)

  • Dual Arm Cortex-A72 @1.65GHz,
  • Dual Arm Cortex-R5F @800MHz

Programming Logic (PL)

  • Up to 2,473.8K Logic cells & 1,130.88K LUTs
  • GTM2 High Speed Transceivers x 20 @112 Gbps

AI Engine (AIE)

    • AI Engine Tiles up to 126
    • AI Data Memory up to 32Mb
Memory & Storage
  • 32bit, 8GB LPDDR5X from PS
  • 32bit, 8GB LPDDR5X from PL
  • 2 x Dual channel (2x16bit) 8GB LPDDR5X from PL
  • 32GB eMMC Flash Expandable up to 128GB
  • 256MB (8bit) OSPI Flash or 256MB (4bit) QSPI flash from PS
  • 2Kb EEPROM
Other Features
  • 10/100/1000 Ethernet PHY with PTP
  • 1 x USB Transceiver PHY
  • 1 x Clock Generator for TXVR Banks
  • 1 x Low Phase Noise Jitter Attenuating Clock Generator for RF ADC and DAC
  • 1 x FAN Header
  • 1 x SYNC IN & SYNC OUT
  • 1 x PPS IN

Board to Board Connector1 Interfaces (400pin)

  • 16 ADC Channels up to 32Gsps
  • 16 x DAC Channels up to 16Gsps
  • X5IO Bank IOs – up to 63 LVDS/127SE
  • HD Bank IOs – up to 15SE

Board to Board Connector2 Interfaces (400pin)

From PL Block
  • 20/10 GTM2 High Speed Transceivers (Up to 56Gbps/112Gbps) or 12 GTYP High Speed Transceivers (Up to 32Gbps)
From PS Block:
  • 1 x 10/100/1000Mbps Ethernet
  • 1 x RGMII
  • 1 x SD (4bit)
  • 1 x USB2.0
  • 1 x SPI with 3 CS (Optional)
  • 1 x CAN FD
  • 1 x I2C
  • 1 x Debug UART
  • 1 x JTAG
  • 1 x SYSMON VP/VN
  • 1 x Thermal Diode Out

Board to Board Connector3 Interfaces (128pin)

ADC: 16 x ADC Channels up to 32Gsps
DAC: 16 x DAC Channels up to 16Gsps

Software Features

  • Yocto / PetaLinux BSP with Vivado hardware support
  • Linux driver support for PL (Programmable Logic) and DMA subsystems
  • High-speed I/O and networking stack support (PCIe, Ethernet, etc.)
  • RF data converter support (specific to Versal RF devices)
  • Bare-metal and real-time low-latency application support
  • Vitis development environment for acceleration

General Features

  • Power Input: 12V through B2B Connector2
  • Environment Specification: REACH& RoHS3 Compliant*
  • Compliance: CE*
*Under Progress

Custom Design Sevices

iWave provides end-to-end ODM services, from concept to production, leveraging our in-house expertise in hardware design, software development, FPGA design, and mechanical enclosure design. The FPGA expertise at iWave includes RTL, high speed bus interface and transceivers, storage, video, networking, and high-speed ADC/DAC with the entire product lifecycle, from initial concept to mass production and ongoing support.

RELATED VIDEOS

Play Video about Versal YouTube Thumbelina
Play Video about FPGA YouTube Thumbelina
Play Video about Versal AI youtube banner

Copyright © 2022 iWave Systems Technologies Pvt. Ltd.