Agilex™ 7 (R24C) SOSA-aligned 3U VPX Plug-in Module

Agilex™ 7 (R24C) SOSA-aligned 3U VPX Plug-in Module

iG-RainboW-G51V®

  • Agilex 7 (R24C) SoC FPGA
  • Compatible Agilex 7-Series – Agilex AGF 006, AGF 008, AGF 012, AGF 014, AGF 019, AGF 023, AGF 022, AGF 027
  • Up to 2.7M Logic cells
  • Supports 10GBASE-KX4/1000BASE-KX/40GBASE-KR4/10GBASE-KR
  • IPMC with Arm® 32-bit Cortex®-M0+ CPU
  • MT Ferrule Connector for Optical Transceiver
Categories: ,

Agilex 7 (R24C) SoC FPGA

SoC

Compatible with AGF 012, AGF 014, AGF 019, AGF 023,
AGF 022, AGF 027
Field Programmable Gate Array (FPGA)

  • Up to 2.7M Logic elements

Hard Processing System (HPS)

  • Quad-core 64-bit Arm Cortex-A53 up to 1.50 GHz
Memory & Storage

8GB DDR4 with ECC for HPS (64bit + 8bit)
8GB DDR4 with ECC for FPGA (64bit + 8bit)
2 x 144Mb QDR-IV For FPGA (18bit)
32GB eMMC (Expandable up to 128GB)
1Gb QSPI Flash (Expandable up to 2Gb)
EEPROM

IPMC

Arm® 32-bit Cortex®-M0+ CPU up to 80 MHz
On chip 64KB of flash and 4KB of SRAM

VPX Front Panel features

  • USB 2.0 through USB Type-C Connector
  • Debug UART through 3-Pin Header

VPX On board features

  • On Board Clock Generators and Clock Buffers
  • Temperature Sensor x1
  • Elapse Counter x1
  • EEPROM x1

3U VPX Backplane

Connector – P0

Utility Plane

  • System Control Signals (GA[0:4], P, SYSRESET, NVMRO)
  • System Reference Clocks (REF_CLK, AUX_CLK)
  • IPMB-A, B & JTAG
  • Power Input (12V VDC, 3.3V_AUX)
Connector – P1A +P1B

Data Switch Port-01

  • DS01[3:0] – 10GBASE-KX4/40GBASE-KR4/10GBASE-KR

Data Plane Port-01

  • DP01[3:0] – 10GBASE-KX4/40GBASE-KR4/10GBASE-KR

Data Plane Port-02

  • DP02[3:0] – 10GBASE-KX4/40GBASE-KR4/10GBASE-KR

Data Plane Port-03

  • DP03[3:0] – 1000BASE-KX/40GBASE-KR4/10GBASE-KR

System Control Signals (Maskable Reset, SYSCON, GDiscrete1)
Maintenance Port MP01
Power Input (VBAT)

Connector – P2A

Control Switch Port

  • CSutp01 – 1000BASE-KX/10GBASE-KR

Control Plane Port

  • CPutp[01:06] – 1000BASE-KX/10GBASE-KR

Maintenance Port MP02

Aperture Pattern J – P2B

MT Ferrule Module – MM12F – 12 Fibre ports (Through Firefly Connector)

Profile Specification

Profile Set 1
  • Profile: SLT3-SWH-4F1U7U1J-14.8.7-1
  • Module Profile: MOD3-SWH-4F1U7U1J-16.8.7-1
  • Module Profile as per AMPS:
  • MODA3-16.8.7-1-1-F2C-(3E5-4E2) (7E2) [E12]
Profile Set 2
  • Profile: SLT3-SWH-4F1U7U1J-14.8.7-0
  • Module Profile: MOD3-SWH-4F1U7U1J-16.8.7-2
  • Module Profile as per AMPS:
  • MODA3-16.8.7-1-0-F2C-(4E8-N) (7E7) [N]

General Specification

Slot Pitch

1 inch Conduction Cooled

BSP Support

Linux

Form Factor

160mm X 100mm

Environment Specification

RoHS & REACH Compliant

Custom Design Sevices

iWave provides end-to-end ODM services, from concept to production, leveraging our in-house expertise in hardware design, software development, FPGA design, and mechanical enclosure design. The FPGA expertise at iWave includes RTL, high speed bus interface and transceivers, storage, video, networking, and high-speed ADC/DAC with the entire product lifecycle, from initial concept to mass production and ongoing support.

THERMAL SOLUTIONS

For any highly integrated FPGA VPX Plug-in Module, thermal design is a very important factor. iWave supports a VITA 65.0 compliant 3U Conduction Cooled Heat Spreader.

RELATED VIDEOS

Play Video
Play Video
Play Video

Copyright © 2022 iWave Systems Technologies Pvt. Ltd.