ARINC 818モニター

ARINC 818モニター

ARINC 818 Monitor is a rugged display module, powered by High-Performance FPGA to accept all ARINC 818 FC line rates Upto 10Gbps and display the converted video data on the monitor for various ICD Specification with very low latency. It supports any input resolution  and will display a fixed resolution of Full HD @ 60fps video.

仕様

Hardware Spec:

  • 1x SFP connector for ARINC818-2 Optical /75-ohm Copper Input
  • Operating temperature – Operating 0 to +55℃ (Commercial).

ARINC 818 Monitor Spec:

  • Accepts ARINC818 video stream at different resolutions and refresh rates Upto UHD @30FPS / 2K @60FPS.
  • ARINC818-2 Link rate supports:
table
  • The ARINC Monitor will be configured with a single line rate as its default factory setting.
  • The supported resolution depends on the configured link rate
  • The ARINC monitor has a feature to detect when no source is provided, displaying “no video” 
  • LCD display output is fixed to RGB Full HD @ 60fps video resolution.

LCD Display:

  • Active-Matrix Liquid Crystal Display composed of a TFT LCD panel.
  • Screen Diagonal: 15.6 inches.
  • Rugged panel with VESA-100 & 70 mounting options.
  • Contrast Ratio: 1000:1.
  • Viewing angle: 80degree.
  • Display mode: AHVA (Advanced Hyper-Viewing Angle).
  • LED backlight with driving circuit design.
  • Brightness: 500 cd/m2
  • Backlight Life: Minimum 50K Hours

ハイライト

  • 光と銅の両方の伝送媒体をサポート
  • Quick ARINC 818 ICD customization as per customer requirement

関連ビデオ

著作権 © 2022 iWave Systems Technologies Pvt.