i.MX 8M Plus OSM LGA Module

i.MX 8M Plus OSM LGA Module

iW-RainboW-G40M®

  • i.MX 8M Plus Q/QL/D CPU with 64-bit ARMv8 Architecture
  • NPU with up to 2.3 TOP/s Neural Network performance
  • Up to 8GB LPDDR4 Memory
  • IEEE 802.11a/b/g/n/ac/ax Wi-Fi & Bluetooth 5.0 (ax is optional)
  • 10+ years of Product Longevity Program
  • Excels in ML vision, edge intelligence & advanced multimedia applications
  • OSM v1.0, Size-L LGA Module

Downloads

Specification

On Module Feature:

CPU

i.MX 8M Plus Quad :  4 x Cortex-A53, 1 x Cortex-M7, GPU, VPU, NPU ,ISP & HiFi4 Audio DSP
i.MX 8M Plus Quad Lite : 4 x Cortex-A53, 1 x Cortex-M7 & GPU
i.MX 8M Plus Dual : 2 x Cortex-A53, 1 x Cortex-M7, GPU, VPU, NPU ,ISP & HiFi4 Audio DSP

Memory & Storage

LPDDR4 – 2GB (Expandable up to 8GB)
eMMC Flash – 16GB (Expandable up to 256GB)

Other

IEEE 802.11 a/b/g/n/ac/ax Wi-Fi & BT 5.0 (ax is optional)

OSM LGA Features:

  • RGMII X 2
  • USB 3.0 x 2
  • USB 2.0 x 2
  • PCIe 3.0 x 1
  • SDIO x 2 (4 bit x 1, 8 bit x 1** )
  • HDMI 2.0a TX x 1
  • SPI x 2
  • CAN x 2

*4 lane MIPI CSI X 1 is Optionally available through vendor defined pins

**Optional feature

  • I2C x 2
  • OSM GPIOs
  • 4 lane MIPI DSI x 1
  • 4 lane MIPI CSI X 1*
  • 4 lane MIPI CSI x 1
  • 4 lane LVDS x 2
  • I2S x 1
  • UART x 4 ( 1 is optional)
  • PWM x 1

OS Support:

  • Linux 5.4.24 (or higher)
  • Android 11 (or higher)
  • Ubuntu 20.04 (or higher)

General Features:

Power Input

5V, 2.5A through OSM LGA

Form Factor

45mm x 45mm (Size L)

Operating Temperature

-40°C to +85°C (Industrial)

Environment Specification

REACH & RoHS3 Compliant

Note: Optional features are not supported in default configuration

THERMAL SOLUTIONS

For any highly integrated OSM Modules, thermal design is a very important factor. iWave Supports Heat Sink and heat spreader Solution for i.MX 8M Plus OSM LGA Module

OSM Based Pico ITX SBC

  • Gigabit Ethernet Jack x 2
  • GNSS receiver Module – GPS/GLONASS/Galileo/BeiDou
  • USB 3.0 x 2
  • USB 2.0 OTG (micro AB Receptacle Connector)
  • USB 2.0 Host Type-A x 2
  • Micro SD
  • HDMI TX x 1
  • 5.5” 1080p MIPI DSI display connector
  • 2 Lane MIPI DSI Display (Optional)
  • 10.1” LVDS Connecter
  • MIPI CSI Camera Connector
  • Audio In & Out Jack through I2S Codec x1
  • Full function UART – 1 Port
  • RTC with a backup battery
  • CAN Header x 1
  • RS232 Header x 1
  • M.2 Connector Key B/M (Key M is optional)
  • 8 bit SD (Optional)

Copyright © 2020 iWave Systems Technologies Pvt. Ltd.