iWave Japan      Welcome to iWave Systems

ARINC 818-2

3 Item(s)

per page

List  Grid 

Set Descending Direction
  • ARINC 818-2 IP Core

    ARINC 818-2 IP Core

    Rs0.00

    iWave's ARINC IP core is ARINC 818–compliant, which can be implemented on any transceiver based FPGA. It can be used for both transmit-and-receive applications. This core has flexible user interface, allowing for various video parameter configuration. This IP core supports Line Synchronous Mode.

    Learn More
  • ARINC 818 (front)

    ARINC 818 to DVI Conversion Card

    Rs1.00

    The ARINC818 Embedded card shall be installed in an avionics application. The card shall have 6U size CPCI PICMG 2.0 Rev 3.0 backplane compliance with necessary card locking mechanism for fitment into the backplane cPCI chassis. ARINC 818 Embedded card offers speeds up to 512 MB/s of DMA transfer and up to a 6 Gb/s link rate for ARINC 818. Copper interfaces offer speeds up to 1.5 Gb/s. These cards can capture video over the DVI link and transmit video over ARINC 818 using either fiber or copper. They can also receive video and display the video via DVI.

    Learn More
  • ARINC 818-2 Protocol Conversion & Analyzer Card

    ARINC 818-2 Protocol Conversion & Analyzer Card

    Rs1.00

    iWave’s ARINC 818-2 Protocol Conversion & Analyzer Card is used to Process and Analyze the ADVB Packets generated by any ARINC 818 based systems. Firmware developed by iWave simplifies to complete solution to capture the ADVB packets and visualize it with the assist of GUI. The card consists of 2GB DDR3 DIMM RAM module for the processing and capturing of the video frames. This card can be installed in the CPU without the requirement of external power supplies and can be operated as a standalone device

    Learn More

3 Item(s)

per page

List  Grid 

Set Descending Direction