iWave Japan      Welcome to iWave Systems

iW-RainboW-G35D

ZU19/17/11 Zynq UltraScale+ MPSoC development kit


Rs0.00

Overview

iWave's Zynq Ultrascale+ SoC Development kit comprises of Xilinx's Ultrascale+ MPSoC SOM and Ultra-High-Performance carrier card. The SOM is equipped with 64-bit 4GB DDR4 RAM with ECC for PS & 64-bit 4GB Dual DDR4 RAM for PL. The Zynq Ultrascale+ MPSoC development kit carrier board supports required set of features like FMC+ (HPC), FMC (HPC), FireFly, QSFP, SFP+, 12-Pin Pmod, and HDMI- IN/OUT connectors to validate Zynq Ultrascale+ MPSoC high-speed PL interfaces and PCIe x4, SATA, USB-Type-C, Display Port, Gigabit Ethernet and SDI Video IN/OUT on-board connectors to validate  the Zynq Ultrascale+ MPSoC high-speed PS interfaces.

iwave zynq ultrascale+ zu19/17/11 devkit front

Mouse over the image for zoom

More Views

  • iwave zynq ultrascale+ zu19/17/11 devkit front
  • iwave zynq ultrascale+ zu19/17/11 devkit side
  • Zynq Ultrascale+ MPSoC with 1143K Logic Cells

  • PS-GTR Transceivers x 4 @ 6Gbps
  • PL-GTH Transceivers x 32 @ 16.3Gbps
  • PL-GTY Transceivers x 16 @ 32.735Gbps
  • FMC+ HPC Connector
  • FMC HPC Connector
  • QSFP & SFP+ Connector
  • FireFly Connector
  • PCIe x4 Lane Connector
  • Dual 12-Bit Pmod Connectors
  • HDMI- IN/OUT
  • SDI Video IN/OUT
  • Zynq Ultrascale+ MPSoC SOM:
    • Zynq Ultrascale+(ZCU19EG) MPSOC (-1 speed) @ 1200 MHz

    • PMIC with RTC
    • 8GB eMMC Flash (for boot code)
    • 4GB DDR4 RAM for PS
    • 4GB Dual DDR4 RAM for PL
    • PS-GTR Transceivers x 4 @ 6Gbps
    • PL-GTH Transceivers x 32 @ 16.3Gbps
    • PL-GTY Transceivers x 16 @ 32.735Gbps
    • Gigabit Ethernet PHY
    • USB2.0 Transceiver
  • Ultra-High-Performance Carrier Board:
    • PS - Interface

      • 10/100/1000 Ethernet x2
      • CAN Header x1
      • Debug Console x1
      • SD Connector x1
      • USB 2.0 OTG Connector x1
      • M.2 SATA Connector x1
      • DP Connector x1
      • USB-Type-C Connector x1
      • PCIex4 Connector x1
      • GPIO Header x1
      • RTC Holder x1
      • JTAG Connector x1
    • PL - Interface
      • FMC+ Connector x1
      • FMC Connector x1
      • QSFP+ Connector x1
      • FireFly Connector x1
      • SFP+ Connector x1
      • Pmod Connector x2
      • SDI Video IN Connector x1
      • SDI Video OUT Connector x1
      • HDMI IN Connector x1
      • HDMI OUT Connector x1
  • Power Supply

    • 4-Pin DIN Power Connector (12V) x1
  • Switches
    • Reset Button x1
    • Power ON/OFF Switch x1
    • PS-GTR Lane Selection Switch x1
  • REACH & RoHS Compliant

Get a Quote

* Required Fields

Powered by WebForms