iWave Japan      Welcome to iWave Systems

iW-RainboW-G24D

Arria 10 SoC FPGA Development Platform


Rs0.00
Lead Time: 2 Weeks

Overview

iWave’s Arria10 SoC/FPGA Development Kit comprises of Arria10 SoC/FPGA SOM and High Performance Carrier Card. Arria10 SoC/FPGA Development Kit enables, customers to develop rapid prototypes and validate the highspeed interfaces and I/Os. The SOM is equipped with 4GB DDR4 RAM (64bit) from FPGA and 2GB DDR4 SDRAM (32bit) with ECC from HPS (Expandable). Arria10 SoC/FPGA Development Kit carrier board supports wide range of highspeed interfaces like FMC (HPC) Connectors, SATA, SFP+ and PCIe connector to validate Arria10 FPGA high speed transceivers and other on-board connectors to validate Arria10 SoC(HPS) interfaces.

Arria 10 SOM+Carrier Bord_Top

Mouse over the image for zoom

More Views

  • Arria 10 SOM+Carrier Bord_Top
  • SOM+Carrier Bord_Angle
  • Carrier Bord_Bottom
  • Arria 10 SoC & FPGA device compatibility
    • SX270, SX320, SX480, SX570, SX660
    • GX270, GX320, GX480, GX570, GX660
  • 24 high speed transceivers @ 17.4Gbps
  • FMC HPC Connector x 2
  • Gigabit Ethernet x 1 Port
  • PCIe & SATA Ports
  • Dual 12-Bit PMOD Connectors
  • SFP+ Connector

 

  • Arria 10 SoC FPGA SOM:
    • Compatible Arria10 SoC Family - SX270, SX320, SX480, SX570, SX660
    • Compatible Arria10 FPGA Family - GX270, GX320, GX480, GX570, GX660
    • 1GB DDR4 SDRAM (32bit) with ECC for HPS/FPGA (Expandable) ¹²
    • MicroSD Connector for HPS booting ¹³
    • NAND Flash for HPS booting (Optional) ¹³
    • Configuration Flash for FPGA (Optional)
    • DDR4 RAM (64bit) from FPGA (Optional)
  • Carrier Board:
  • High Speed Interfaces:
    • FMC connector x2
    • PCIe x 1 Lane Connector  x1
    • SATA x 1 Lane Connector x1
    • SFP+ connector X1
    • SDI Video IN BNC Jack*
    • SDI Video OUT BNC Jack*
  • Communication Features:
    • HPS Gigabit Ethernet through RJ45 Magjack
    • OTG USB 2.0 through Micro AB connector x1
  • Audio and Video:
    • Display Port* X1 
  • FPGA Standard I/O Interfaces:
    • 12pin PMOD Connector x2
  • HPS Standard I/O Interfaces:
    • HPS IO Header
  • Debug Interfaces:
    • UART to USB converter with USB MicroAB Connector
    • JTAG Connector
  • Power Supply: 12V Power Input Jack
  • Form Factor: 180mm X 120mm
  • REACH & RoHS Compliant

 

¹ In Arria10 SoC/FPGA SOM, these interfaces can be supported only if Arria10 SoC family devices which supports Hard Processor System (HPS) are used.

² In Arria10 SoC/FPGA SOM, if Arria10 SoC family device is not used and FPGA family device is used, then also 32bit DDR4 can be supported from FPGA fabric.

³ In Arria10 SoC/FPGA SOM, these interfaces can be supported only if Arria10 SoC family devices are used because these interfaces are supported through Dedicated I/O pins of Hard Processor System (HPS) .

*Optional features not supported by default. Contact iWave for more details.

Intel Arria 10 Soc FPGA Development Platform
Part numbers Product Features
iW-G24D-CU2F-4E002G-S008G-LCC SX480 (-2 speed) Arria 10 SOC, 2GB RAM for HPS, 4GB FPGA RAM, 256MB QSPI Flash, 8GB MicroSD -  development kit with Linux loaded 
iW-G24D-CU2F-4E002G-S008G-LCF SX660 (-1 speed) Arria 10 SOC, 2GB RAM for HPS, 4GB FPGA RAM, 256MB QSPI Flash, 8GB MicroSD -  development kit with Linux loaded

Get a Quote

* Required Fields

Powered by WebForms