iWave Japan      Welcome to iWave Systems

iW-RainboW-G24M

Intel Arria 10 SoC SOM


Rs0.00

Overview

iWave’s Arria 10 SoC System on Module is based on the Arria 10 SX family device with F34 package. The module is equipped with 32-bit DDR4 memory support for HPS with ECC and 64-bit DDR4 support for FPGA. All the IOs and high-speed transceiver blocks will be available on the SOM board to board connectors. The Arria 10 SoC System On Module is aimed to offer applications such as Test and measurement equipment, Control and intelligence equipment, Diagnostic medical imaging equipment, Wireless infrastructure equipment, Compute and storage equipment, Broadcast and distribution equipment.


AD-FMCDAQ2 Integration

Intel Arria10 SoC FPGA SOM

Mouse over the image for zoom

More Views

  • Intel Arria10 SoC FPGA System On Module
  • Intel Arria10 Soc SOM
  • Intel Arria10 SoC FPGA SOM
  • Arria10 SoC & FPGA device compatibility
    • SX270, SX320, SX480, SX570, Sx660
    • Gx270, GX320, GX480, GX570, Gx660
  • 4-GB DDR4 RAM (64bit) from FPGA 4
  • 24 high-speed transceivers @ 17.4Gbps
  • 48/96 LVDS from BANK 3B & 3C
  • 93 SE from BANK 2A & 3A
  • Dual 240 Pin Board to Board Connector
  • Variable IO voltage support from PMIC
  • Industrial Grade operation
  • SoC/FPGA:
    • Intel Arria10 SoC/FPGA
      • Compatible Arria10 SoC Family - SX270, SX320, SX480, SX570, SX660
              With upto 660K Logic Elements, 24 High Speed Transceivers and integrated Dual Core ARM Cortex A9 @ upto 1.5 GHz/Core Hard Processor System (HPS).
      • Compatible Arria10 FPGA Family - GX270, GX320, GX480, GX570, GX660, GX900, GX1150

              With upto 1150K Logic Elements and 24 High Speed transceivers

  • Memory:
    • 2GB DDR4 SDRAM (32bit) with ECC for HPS (Expandable) ¹, ²
    • MicroSD Connector for HPS booting ¹, ³
    • eMMC Flash for HPS booting (Optional) ¹, ³
    • Configuration Flash for FPGA (Optional)
    • 4-GB DDR4 RAM (64bit) from FPGA 4

  • Other On-SOM Features:
    • JTAG Header
    • FAN Header
    • FPGA AS Header (Optional)
    • FPGA Configuration Selection Switch (Optional)

  • Board to Board 1 Interfaces:
    • FPGA High-Speed Transceivers (up to 17.4Gbps) x 18
    • FPGA IOs & General Purpose Clocks - Bank2A
      • Up to 46 Single-Ended IOs
      • One General Purpose Clock Input LVDS Pair/Single Ended
      • Two General Purpose Clock Output LVDS Pairs/Single Ended
    • FPGA IOs & General Purpose Clocks – Bank3A
      • Up to 47 Single-Ended IOs
      • Two General Purpose Clock Input LVDS Pairs/Single Ended
      • Two General Purpose Clock Output LVDS Pairs/Single Ended

  • Board to Board 2 Interfaces:
    • From HPS Block: 1, 5
      • Gigabit Ethernet x 1 Port (through On-SOM Gigabit Ethernet PHY)
      • USB OTG x 1 Port (through On-SOM USB ULPI PHY)
      • HPS Dedicated UART (UART1) x 1 Port
      • SPI x 1 Port
      • I2C x 1 Port
      • HPS GPIOs
      • HPS Warm Reset
    • From FPGA Block:
      • FPGA High-Speed Transceivers (up to 17.4Gbps) x 6
      • FPGA IOs & General Purpose Clocks – Bank3B
        • Up to 24 LVDS IOs
        • Two General Purpose Clock Input LVDS Pairs/Single Ended
        • Two General Purpose Clock Output LVDS Pairs/Single Ended
      • FPGA IOs & General Purpose Clocks – Bank3C
        • Upto 24 LVDS IOs
        • Two General Purpose Clock Input LVDS Pairs/Single Ended
        • Two General Purpose Clock Output LVDS Pairs/Single Ended
      • JTAG Interface

  • Power Supply: 5V
  • Form Factor: 95mm x 75mm
  • REACH & RoHS Compliant


¹ In Arria10 SoC/FPGA SOM, these interfaces can be supported only if Arria10 SoC family devices which supports Hard Processor System (HPS) are used.

² In Arria10 SoC/FPGA SOM, if Arrai10 SoC family device is not used and FPGA family device is used, then also 32bit DDR4 can be supported from FPGA fabric.

³ In Arria10 SoC/FPGA SOM, these interfaces can be supported only if Arria10 SoC family devices are used because these interfaces are supported through Dedicated I/O pins of Hard Processor System (HPS).

4 Supported on SX480/GX480 or higher family devices only.

5 In Arria10 SoC/FPGA SOM, if Arrai10 SoC family device is not used and FPGA family device is used, then these Shared I/O interfaces cannot be used. But the same pins can be used as FPGA Bank2L from FPGA fabric.

  • Test and measurement equipment
  • Control and intelligence equipment
  • Diagnostic medical imaging equipment
  • Wireless infrastructure equipment
  • Compute and storage equipment
  • Broadcast and distribution equipment
Intel Arria 10 SOC SOM
Part Numbers Product Features
SX270 Arria 10 SoC, -3 speed (Dual ARM Cortex A9 + 270K LE), 1GB HPS DDR4, 8GB MicroSD, (Linux OS) - Industrial grade samples iW-G24M-CU2F-4E001G-S008G-LIG
SX480 Arria 10 SoC, -2 speed (Dual ARM Cortex A9 + 480K LE), 2GB HPS DDR4, 4GB FPGA DDR4, 8GB MicroSD, (Linux OS) - Extended grade samples iW-G24M-CU2F-4E002G-S008G-LEI
SX660 Arria 10 SoC, -1 speed (Dual ARM Cortex A9 + 660K LE), 2GB HPS DDR4, 4GB FPGA DDR4, 8GB MicroSD,(Linux OS)  - Industrial grade samples iW-G24M-CU2F-4E002G-S008G-LIK
SX270 Arria 10 SoC, -3 speed (Dual ARM Cortex A9 + 270K LE), 1GB HPS DDR4, ( with boot code) - Industrial grade iW-G24M-CU2F-4E001G-S000G-BIG
SX480 Arria 10 SoC, -2 speed (Dual ARM Cortex A9 + 480K LE), 2GB HPS DDR4, 4GB FPGA DDR4, ( with boot code) - Extended grade iW-G24M-CU2F-4E002G-S000G-BEI
SX660 Arria 10 SoC, -1 speed (Dual ARM Cortex A9 + 660K LE), 2GB HPS DDR4, 4GB FPGA DDR4, ( with boot code) - Industrial grade iW-G24M-CU2F-4E002G-S000G-BIK

Note: Some of the above listed part numbers will applicable for only MOQ orders. Please contact [email protected] for more details.

Get a Quote

* Required Fields

Powered by WebForms

×

Fill up the below details to get the access to User Manual