iWave Japan      Welcome to iWave Systems


Cyclone V SoC System On Module

1 week Lead Time


iWave Systems launching Altera's Cyclone V SX SoC based Qseven compatible module for the increased system performance requirements. The Dual ARM Cortex A9 core with the FPGA allows greater flexibility for the system designers and helps to lower the system cost and power consumption. The improved logic integration with integrated high speed transceivers and hard memory controllers provides increased bandwidth capacity which is ideal for cost-sensitive high end applications.

Latest Updates

iWave Cyclone V SoC Q7 System On Module top

Mouse over the image for zoom

More Views

  • iWave Cyclone V SoC Q7 System On Module top
  • iWave Cyclone V SoC Q7 System On Module back
  • ARM Cortex A9 Dual core CPU integrated with FPGA with up to 110K LEs
  • Enhanced with integrated transceivers and hard memory controller
  • Readily available FPGA IP cores for integration
  • R2.0 Qseven compatible module
  • First ARM based Qseven SOM module with PCIe x 4 lane support
  • CPU:
    • Altera's Cyclone V SX SoC FPGA
    • Integrated Dual core ARM Cortex-A9 Hard Processor System(HPS)
    • FPGA with upto 110K LEs

  • Memory:
    • 512MB DDR3 with ECC for HPS
    • 16 MB QSPI Flash*
    • On-SOM Micro SD Connector#
    • 256MB DDR3 for FPGA
    • EPCQ flash* / QSPI Flash for FPGA
    • EEPROM*

  • On Board Peripherals  Support:
    • JTAG  Header  for FPGA*
    • JTAG Header for HPS*
    • DIP Switch for boot settings
    • RTC controller

  • 80 Pin Expansion Connector:
    • FPGA  IOs (Up to 45 Single Ended IOs - SE IOs)
    • 9 TX LVDS  Pairs / 18 SE IOs
    • 11 RX LVDS  Pairs / 22 SE IOs
    • 10 Single Ended IOs
    • 5 Single Ended IOs

  • FPGA Dedicated Clock IOs:
    • General Purpose Clock Inputs (2 LVDS/2 SE)
    • General Purpose Clock Output (1 LVDS/2 SE)

  • Others:
    • SMBUS / 2 SE IOs

  • Operating Temperature: -40C to +85C Industrial


  • Qseven PCB Edge  Connector Interfaces:

  • From HPS:
    • Gigabit Ethernet - 1 Port (On-SOM PHY)
    • USB 2.0 Host - 4 Ports (On-SOM HUB)
    • CAN  - 1 Port
    • SD/MMC (8 bit) #
    • WDOG - 1 Port
    • I2C - 2 Ports
    • SPI - 1 Port
    • Debug  UART - 1 Port
    • 2nd UART  - 1 Port
    • Other Control IOs - Through HPS

  • From FPGA+:
    • LVDS LCD  - 2 Ports (FPGA Soft  IP)/ 23 SE IOs
    • AC97/I2S Audio (FPGA Soft  IP)/ 5 SE IOs
    • PWM
    • FPGA IOs - 8 SE IOs

  • From FPGA High Speed Transceivers+:
    • SATA (FPGA Soft  IP)
    • PCIe Gen1  x 4 Lane

  • OS Support:

    • Linux 3.10

  • Form Factor: 70mm x 70mm Qseven Specification 2.0

  • Power Input: 5V DC

  • REACH & RoHS Compliant

* Optional
# On-SOM Micro SD Connector and Qseven Edge SD/MMC are sharing the same interface
+If the FPGA interfaces available in the Qseven edge are not used for Qseven compliance requirement, same interface pins can be used for custom Industrial/networking interface requirements.

  • Industrial Automation
  • Smart Energy Systems
  • Video Surveillance 
  • Defense & Aerospace
  • Mobile, Ultra Mobile
  • Automotive - Telematics
  • Medical Instrumentation
Cyclone V SoC System On Module
Product Features Part Numbers
Cyclone V SOC 5CSXFC6 (Dual ARM Cortex A9 + 110K LE FPGA), 512MB HPS DDR3 with ECC, 16MB QSPI flash for HPS, 256MB FPGA DDR3, Expansion connector. (No software image loaded) iW-G17M-Q702-3E512M-S000G-NIB
Cyclone V SOC 5CSXFC4 (Dual ARM Cortex A9 + 40K LE FPGA), 512MB HPS DDR3 with ECC, 16MB QSPI flash for HPS, 256MB FPGA DDR3, Expansion connector. (No software image loaded) iW-G17M-Q702-3E512M-S000G-NID

Note: Some of the above listed part numbers will applicable for only MOQ orders. Please contact [email protected] for more details.

Get a Quote

* Required Fields

Powered by WebForms


Fill up the below details to get the access to User Manual