iWave Japan      Welcome to iWave Systems

Linux 3.14.28 BSP for iWave's i.MX6 Q7 SOM

Linux 3.14 BSP for Rainbow G15M-Q7 i.MX6 Q7 SOM  

iWave systems updating the Linux BSP for its embedded board solutions- i.MX6 Qseven modules and development kit with 3.14.28 kernel.  The updated BSP release will support the following features:  

  • i.MX6 ARM Cortex A9 Quad, Dual, Dual Lite & Solo CPU iMX6 Qseven dev kit
  • 1GB DDR3 RAM (Quad, Dual, Dual Lite CPU version)/ 512MB DDR3 (Solo CPU version)
  • Freescale MMPF0100 PMIC
  • SPI NOR Flash (default boot)
  • eMMC Flash (default OS storage)
  • Data UART
  • uSD slot
  • Standard SD slot
  • USB 2.0 Host
  • USB 2.0 device
  • 10/100/1000 Ethernet
  • PCIex1 Port
  • SATA Port
  • CAN Port
  • LVDS display port
  • PWM for backlight
  • HDMI Port with Audio
  • 7”TFT LCD with capacitive touch
  • Hardware Codecs (Encode/Decode)
  • 2D/3D Graphics
  • CMOS CSI camera port
  • MIPI CSI camera port
  • AC97 Audio In/Out
  • Console UART
  • RTC
  • I2C Port
  • GPIOs

This release will be available from August’15 for customers and it will support single BSP, Binary image & MFG tool for all the four i.MX6 CPU version (Quad/Dual/Dual Lite/Solo) based Qseven SOMs.

Besides this Linux BSP support, Android KitKat and WEC7 board support packages are also supported for the i.MX6 Q7 modules (Rainbow G15M-Q7) by iWave systems