iWave Japan      Welcome to iWave Systems

Freescale Pico ITX SBC based on i.MX6

i.MX 6 Pico ITX SBC is the Industry's latest Single Board Computer around Freescale Semiconductor’s i.MX 6 that includes single, dual, and quad-core families based on the ARM® Cortex™-A9 architecture which is iWave’s 4th i.MX 6 based designs. Measuring just 10cm x 7.2cm, iWave’s i.MX 6 SBC is a highly integrated platform for increased performance in “Intelligent Industrial Control Systems, Industrial Human Machine Interface, Ultra-Portable Devices, Home Energy Management Systems and Portable Medical Devices”.

i.MX 6 Solo/Dual Lite based Pico ITX SBC integrates all standard interfaces into a single board with ultra-compact platform that can be utilized across multiple embedded PCs, systems and industrial designs. The i.MX 6 SBC from iWave with its features like DDR3 RAM, Dual Display, Dual camera inputs, Gigabit Ethernet, Micro SD & SD slots, Dual USB 2.0 hosts, USB 2.0 OTG, Audio Out/In & serial interfaces, enables developers/users to quickly develop/implement their application needs around i.MX 6 processor and optimize the “development effort and time to market” of their products. The i.MX 6 Single Board Computer helps to reduce system cost, supports ultra-small form factor, wide operating temperature range from -20C to +85C and is backed with a minimum five years longevity support.

Single Board Computer Freescale i.MX6

i.MX6 Pico ITX SBC Board

iWave’s  Pico ITX SBC is based on  i.MX6 Dual Lite/Solo based dual/single core ARM Cortex™-A9 core which can operate up to 1GHz with 2D/3D graphics accelerators, 1080p video encode & decode, and integrated power management. The design is also compatible with i.MX6 Quad & Dual processors. The platform is designed keeping extended temperature in mind, which can operate form -20C to +85C temperature range.


The i.MX6 Pico ITX SBC supports the following features;

  • CPU: i.MX6 Dual Lite/Solo, (Quad /Dual compatible)
  • RAM: 512MB DDR3 (Expandable up to 2GB)
  • PMIC: Freescale MMPF0100
  • Debug Console: RS232 to USB Micro-AB connector
  • USB OTG connector
  • Dual USB  Host Connector
  • Micro SD Slot (default boot device)
  • Standard SD/SDIO Slot
  • 10/100/1000Mbps Ethernet
  • Half mini PCIe card connector
  • HDMI  Port
  • LVDS connector  with Backlight
  • 4-wire Resistive Touch controller
  • AC97 Audio Codec with Audio Out Jack & Audio In Header
  • 8bit CMOS Camera Connector
  • 2 Lanes MIPI Camera connector
  • CAN1 Header
  • 4 Position user  Dip Switch & status LEDs
  • Optional eMMC  Support
  • Optional SATA 7pin Connector
  • 80mils Expansion Header-84 pin
    • MIPI DSI
    • SPI
    • CSI0 Camera interface
    • CAN2 Interface
    • UART s- 3 Ports
    • I2C- 3 Ports
    • GPIOs
    • Optional LVDS1 interface
    • Optional MLB 6pin & 3 pin signals
    • Power Input - 5V, 2A (2.5mm Jack)
    • Form factor: Pico ITX (100 x 72mm)
    • Operating temperature range:  -20°C to +85°C
    • OS Support: Linux 3.0.35, Android 4.0*, WEC7*


The Pico ITX module will be supported for minimum 5 years.