iWave Japan      Welcome to iWave Systems

Robust Zero-Tolerant HSR/PRP Ethernet Switch on iWave’s Zynq-7000 SoCs

In the last decade, Ethernet technology has paved its way into the world of mission-critical networks and conquers new domains such as Industrial Automation Systems, Industrial IIoT (IIoT), Power Plants and so on. To overcome the limitations of zero-recovery time when a failure occurs in a communication network, guaranteeing high availability and ensuring no frame loss in the presence of an error in critical-time domains, a new Ethernet redundancy protocols have been developed: HSR (High-availability Seamless Redundancy) and PRP (Parallel Redundancy Protocol).

Today, iWave Systems collaborates with SoC-e (pioneered in developing IP portfolios for leading-edge networking and synchronization technologies for critical time systems), advancing together to provide the immediate availability of HSR/PRP facilitated iWave’s Zynq 7000 SoC Development Kit.

iWave’s Zynq 7000 SOM development platform and Quad FMC Ethernet Daughter Card as target platform, the SoC-e’s HSR-PRP Switch IP Core has been successfully tested and validated for highest throughput.

Features of Zynq 7000 SOC:

3 Port Reference for Non Redundant Network vs HSR/PRP Switch

iWave Zynq 7000 Development Kit








 

            iWave Zynq 7000 Development Kit                   3 Port Reference for Non Redundant Network vs HSR/PRP

  Zynq 7000 SOM Features:

  • SOC: Xilinx Zynq 7000 SOC
  • Z-7007S, Z-7014S, Z-7010, Z-7020
  • Up to Dual Cortex  A9 @ 866MHz
  • Up to 85K Logic cells
  • Up to 121 FPGA IOs
  • 1MSPS ADC, 16 CH Analog input
  • 512MB DDR3 RAM
  • 8GB eMMC Flash
  • 802.11n Wi-Fi / BLE 4.0 Module Kit                                                                   

  Communication Interfaces:                      

  • 10/100/1000 Mbps Ethernet x 1         
  • USB 2.0 OTG Port x 1 

  Additional Features:

  • Debug UART console
  • Micro SD Connector
  • FMC - HPC Connector
  • 20 Pin Standard JTAG Connector
  • RTC Cell Holder
  • 12-Pin PMOD Connectors – 2 Nos                                                                   

  BSP Support: Linux 4.9.0                  

  Power Supply : 5V DC input

  Operating Temperature : -40°C to +85°C  

 

To accomplish the safety-critical mission of transmission and distribution automation, high availability and stability are always essential in the industrial communication networks. Thus, the establishment of two IEC 62439-3 standards, HSR and PRP cuts the network downtime, improving network resilience and ensuring zero switchover time when a link fails.

The combination of iWave’s Zynq SoC SOM and SoC-e’s HSR/PRP Switch IP Core paves the way to reduce the time-to-market, minimalistic design, simphe design complexity, prolonged existence and BSPs / device drivers available in numerous RTOS environments. Also, clients are benefited by iWave & SoC-e during integration.

For further information or enquiries please write to [email protected] or contact our Regional Partners.

Samuel M – Business Development Executive

iWave Systems Technologies Pvt. Ltd.