iWave Japan      Welcome to iWave Systems

SATA 3.0 Bridge Controller


Rs0.00

Overview

iWave’s SATA 3.0 Bridge Controller is compliant with SATA 3.0 specification which provides bridging features between SATA Host (Processor/PC) and SATA Device. SATA 3.0 Bridge Controller is designed to ensure secure SSD/HDD in SATA compliant devices

iWave SATA 3.0 Bridge Controller

Mouse over the image for zoom

More Views

  • iWave SATA 3.0 Bridge Controller
  • Compliant to SATA 1.5Gb/s, 3Gb/s, and 6Gb/s specifications
  • Independent Host & Device Speed Negotiation
  • Supports Safe Eject Handling
  • Negligible performance degradation
  • Compliant to SATA 1.5Gb/s, 3Gb/s, and 6Gb/s specifications (SATA 3.0)
  • Separate Host & Device Speed Negotiation
  • Supports Safe Eject Handling
  • Optional: Encryption Bridge Feature
  • Physical Layer:
    • OOB Control is responsible for controlling OOB Signaling, Speed Negotiation
    • Transceiver PHY performs the following functions:
      • Converts 32-bit parallel data to differential Tx data and received Rx serial data to 32-bit parallel data
      • Clock recovery from serial data
      • 8B/10B encoding and decoding
      • Line-rate change
      • Out-of-Band (OOB) signal generation and detection
      • Provide status to link layer
  • Link Layer:
    • Consists of Link layer FSM, CRC generator & Scrambler
    • Scrambles / De-Scrambles
    • CRC Calculations
    • Adds/removes the frame envelope and extracts the useful contents of the FIS and passes on for further processing
    • Handles flow control and transmission & reception errors
  • Bridge Layer:
    • Bridging b/w SATA Device Link layer & SATA Host Link layer
    • command extraction logic
    • FIS Extraction logic
    • Customizable encryption /decryption logic
  • Data Security
  • Secure SSD
  • RAID System

Get a Quote

* Required Fields

Powered by WebForms