iWave Japan      Welcome to iWave Systems

Arria10 SoC/FPGA FMC+ Development Platform


Rs0.00

Overview

iWave’s Arria10 SoC/FPGA FMC+ Development Kit comprises of Arria10 SoC/FPGA SOM and High-Performance FMC+ Carrier Card. Arria10 SoC/FPGA FMC+ Development Kit provides developers the best Out-Of-The box experience. It enables, customers to develop rapid prototypes and validate the highspeed interfaces and I/Os. The SOM is equipped with 4GB DDR4 RAM (64bit) from FPGA and 2GB DDR4 SDRAM (32bit) with ECC from HPS (Expandable). Arria10 SoC/FPGA Development Kit carrier board supports wide range of highspeed interfaces like FMC+ Connector, PCIe x 4 Connector and NVMe M.2 Connector to validate Arria10 FPGA high speed transceivers and also it supports HDMI Output, USB Blaster-II, Pmod connectors, LEDs, push buttons, sliding switches to validate the Arria10 FPGA I/Os. And, other on-board switches and connectors are available to validate Arria10 SoC (HPS) interfaces.

Arria10 SoC/FPGA FMC+ Development Platform top

Mouse over the image for zoom

More Views

  • Arria10 SoC/FPGA FMC+ Development Platform top
  • Arria10 SoC/FPGA FMC+ Development Platform side
  • Arria 10 SoC & FPGA device compatibility
    • SX270, SX320, SX480, SX570, SX660
    • GX270, GX320, GX480, GX570, GX660
  • 24 high speed transceivers @ 17.4Gbps
  • FMC+ Connector x 1
  • Gigabit Ethernet x 1 Port
  • PCIe x 4 lane Connector
  • NVMe M.2 Connector (through PCIe x 4 lane)
  • USB Blaster-II Interface
  • HDMI v.1.4a Out
  • Pmod Connectors
  • LEDs, Push Buttons, Slide Switches
  • SOM:
    • Compatible Arria10 SoC Family - SX270, SX320, SX480, SX570, SX660
    • Compatible Arria10 FPGA Family - GX270, GX320, GX480, GX570, GX660
    • 2GB DDR4 SDRAM (32bit) with ECC for HPS/FPGA (Expandable)
    • MicroSD Connector for HPS booting
    • NAND Flash for HPS booting (Optional)
    • Configuration Flash for FPGA (Optional)
    • DDR4 RAM (64bit) from FPGA (Optional)
  • Carrier Board:
  • High Speed Interfaces:
  • Communication Features:
    • Gigabit Ethernet through RJ45 Magjack
    • USB Blaster-II Interface
    • Dual Stack OTG USB 2.0 Type A Connector
  • FPGA Standard I/O Interfaces: 
    • 12pin Pmod Connector (through FPGA IOs)
    • 6pin Pmod Connector (through FPGA IOs)
  • Video Interfaces:
  • Debug Interfaces:
    • UART to USB converter with USB MicroAB Connector (for HPS debug)
    • JTAG USB Blaster II circuit with USB MicroAB Connector
    • JTAG Connector (Optional)
  • Additional Features:
    • 8 Nos DIP switch
    • 8 Nos Push button switches
    • 8 Nos LEDS
    • Power ON/OFF Switch
    • Reset Switch
    • 20Pin MAX10 CPLD IO Header (Optional)
  • Power Supply: 12V Power Input Jack
  • Form Factor: 150mm X 140mm
  • REACH & RoHS Compliant
  • Operating temperature: 0° to 50°C

Get a Quote

* Required Fields

Powered by WebForms