iWave Japan      Welcome to iWave Systems

ARINC 818 to DVI Conversion Card


Rs1.00

Overview

The ARINC818 Embedded card shall be installed in an avionics application. The card shall have 6U size CPCI PICMG 2.0 Rev 3.0 backplane compliance with necessary card locking mechanism for fitment into the backplane cPCI chassis. ARINC 818 Embedded card offers speeds up to 512 MB/s of DMA transfer and up to a 6 Gb/s link rate for ARINC 818. Copper interfaces offer speeds up to 1.5 Gb/s. These cards can capture video over the DVI link and transmit video over ARINC 818 using either fiber or copper. They can also receive video and display the video via DVI.

ARINC 818 (front)

Mouse over the image for zoom

More Views

  • ARINC 818 (front)
  • ARINC 818 (back)
  • Uses Cyclone 5 GT Intel FPGA device
  • Converts DVI video to ARINC 818 video protocol
  • Converts ARINC 818 to DVI display
  • ARINC818 video over fiber or coaxial copper support
  • DVI is switchable to the front panel as well as for backplane
  • 6U form factor cPCIE MIL Grade board
  • Power consumption <3W
  • FPGA: Cyclone V GT
  • 512MB, 16-bit DDR3 interface to Video frame buffer
  • FPGA Configuration: ASx4
  • IP Parameter can be configurable as per the customer provided Interface Control Document (ICD)
  • Transmission Medium: Either Optical or Copper
  • Video Input/Output: Either can be through backplane or on-board DVI & SFP Connectors
  • Supports both progressive & interlaced video up to Full HD @ 60fps
  • Supported Interface:
    • 1 x DVI Transmitter
    • 2 x DVI Receiver
    • 1 x SFP+

  • Supported Video Configurations:
    • DVI to ARINC 818
    • ARINC 818 to DVI

  • Cooling Method: Conduction-Cooled
  • Operating Temperature : -40 °C to +85 °C
  • Storage Temperature : -55 °C to +105 °C
  • Vibration 0.1 g²/Hz (maximum), 20 to 2000 Hz
  • Shock: 40 g, 11 ms sawtooth
  • Humidity: 0% to 95% non-condensing

Get a Quote

* Required Fields

Powered by WebForms