iWave Japan      Welcome to iWave Systems

3U VPX High Speed Video/Data Processing Card


Rs0.00

Overview

iWave 3U VPX High-Speed Video/Data Processing Card is a rugged standalone module in the 3U VPX form factor, aimed for the high-speed data, video processing, and display applications is ideal for military, defense, and aerospace applications requiring an optimal balance of performance and power efficiency. iWave 3U VPX High-Speed Video/Data Processing Card is implemented using Xilinx Kintex-7 device architecture and has I/O interfaces including High speed 16 channels of transceiver interfaces capable of operating up to 6 Gbps data rate, Gigabit Ethernet, RS232, RS422, PCIe interface, Built-in health monitoring circuits, HDMI input, and output interfaces

3u vpx video data processing card side

Mouse over the image for zoom

More Views

  • 3u vpx video data processing card side
  • 3u vpx video data processing card with heat sink
  • FPGA: Xilinx Kintex-7 device
  • Rugged Military Grade 3U VPX Single-Slot card as per VITA 46.0 Standard
  • PCIe up to x8 lane VITA 46.4 Backplane Compliance
  • Conduction cooled heat spreader for heat transfer to the unit level
  • 16 pairs High-speed transceiver channels operating speed up to 6 Gbps
  • Module communication with the main processing unit via PCIe/RS422/SPI/RS232/Ethernet
  • Power consumption <15W and supplied from the backplane
  • The Card can perform High-speed transceiver-based protocols like,
    • ARINC818 Video Processing over Copper and Fibre
    • ARINC818 Video Analysing over Copper and Fibre
    • ARINC818 Video switching over Copper and Fibre
    • High-Speed Data Communication using Serial FPDP (sFPDP) VITA 17.1, Aurora 8B/10B 
    • High-Speed Data Acquisition using LVDS/JESD204B Protocol
    • PCI Controller
    • 12G-SDI Interface
    • HDMI 2.0 4K Interface
    • High-Speed Video Processing & Conversion
  • FPGA: Xilinx Kintex 7
  • Memory:
    • 4Gb 32-Bit DDR3 SDRAM
    • 128 Mb Serial Peripheral Interface (SPI) Flash
    • Optional 1Gb Peripheral Interface (BPI) Flash
  • Interfaces Supported On-Board:
    • Health Monitoring built-in test circuitry (P -bit, I-bit, C-bit)
    • Watchdog Monitor
    • Temperature Sensor
    • JTAG Connector
    • Real-Time Counter
  • Interfaces Supported on Backplane Panel:
    • 16 pairs High-speed transceiver channels operating speed up to 6 Gbps
    • PCIe Gen2 up to x8 lane interface as per VITA 46.4 standard
    • HDMI 1.4a Input
    • HDMI 1.4a Output
    • 1 Gigabit Ethernet
    • RS232
    • RS422
    • SPI
    • JTAG Header
    • TTL input and output
    • I2C
  • Form Factor: 100mm x 160mm (as per 3U form factor VITA46.0 and VITA46.4 standard)
  • Temperature Supported: Industrial Grade (-40 to 85 degree Celsius)
  • End Market:
    • Avionics
    • High-Speed Video Applications
    • Military Ships
    • Radar Systems
    • HUD Displays

Get a Quote

* Required Fields

Powered by WebForms