About Us Our Services Our IPs Our USPs Careers Contact Us JAPANESE WEBSITE

 

PROJECT HIGHLIGHTS - HARDWARE

PCI Based Optical Communication Platform

  • Total Turn-key Product development including Board Hardware, FPGA and Software drivers
  • VirtexII Pro (XC2VP7) based logic for the following interface
  • PCI controller with DMA support
  • Optical framer
  • SDRAM controller
  • Rocket I/O Interface
  • Device driver support
  • Linux and Solaris environment
  • Customized drivers for Low latency / Fast throughput requirements
  • Technology transfer for volume production by our customer

Digital Video Processor Platform

Design involved three different types of boards

  • Dual channel Digital video processor with the capability of any digital video input format to any video output format Video Input
  • HD / SD format
  • 24 Bit RGB, 16/20 YCbCr
  • External 16 bit OSD
  • Video Output, HD / SD Format
  • HDMI (High def. multimedia I/F) digital diff. output
  • 24 Bit RGB, 20/24 YCbCr
  • Onboard DDRAM interface

Back to top

Multiprocessor Platform Development

Design, Development and Testing of Multiprocessor Platform with the following features:

  • 32 bit, 66 MHz, RISC Processor platform
  • 4 Processors in a single board configuration
  • Processor communication through DPRAM
  • High-speed LVDS bus interface between processor subsystems & expandable configuration
  • Five CPLDs, 12 Layer board, 9U Size (400mm* 362mm)
  • Glue logic implemented on Xilinx CPLD's

Back to top

SOHO Router Platform Development

Design, Development and Testing of SOHO Router Platform comprising of three Compact PCI boards with the following features:

  • MPC 860 Processor based 4-channel T1/E1 Interface board
  • 8 layer. Based on Tundra Qspan II 6U and Compact PCI form-factor
  • 4 channels of v.35
  • On board expandable flash and SDRAM
  • FPGA logic based implementation using Spartan
  • Turnkey HW / SW driver development
  • PPCBOOT loader , Diagnostics & Linux drivers

  • TI 320 C6 204 Processor based VOIP analog line interface board
  • TI TMS 32066204 DSP processor based board with 3 channels of SLICs and 1ch.of COIC
  • CPCI, 6U, 8 LAYER PCB
  • DSP-CPCI interface through QSPAN II
  • Fully programmable for different transmission requirements.
  • ISDN S Interface board
  • 6 layer with 3U form factor
  • ISDN interface through IPAC controller
  • Linux Host driver with ISDN protocol support.

Back to top

TI 320 C6 204 Processor based VOIP analog line interface board

  • TI TMS 32066204 DSP processor based board with 3 channels of SLICs and 1ch.of COIC
  • CPCI, 6U, 8 LAYER PCB
  • DSP-CPCI interface through QSPAN II
  • Fully programmable for different transmission requirements.

Back to top

ATM Test Suite Development

Developed the complete ATM Test Suite for series of ATM chips supporting OC-12 to OC-48 line rate. For the blocks involving different algorithms, including

  • Traffic Management & Policing
  • Quality of Service
  • Scheduler for real & non real time traffice
  • OAM
  • Buffer management
  • Utopia Interfaces

Back to top

RISC Processor Reference Platform

  • Reference platform for 32bit RISC processor in two modes
  • Full fledged Standalone embedded mode
  • PCI Add-on mode
  • Includes all the standard reference platform features for the target application development and integration
  • PCI Master / Slave capability with Glue logic in CPLD
  • Windows Driver & Diagnostics support
  • Full volume production

Back to top

SBC860 PMC Platform

  • CPCI / IEEE P1386.1 compliant PMC, PCI2.2
  • MPC860 (SAT, T, P) as the CPU at 66/80 MHz
  • Upto 4 MB Flash & 64MB SDRAM, EEPROM, RTC
  • One 10/100 Base-T Ethernet, 2 Serial Ports
  • USB Host controller with two downstream ports
  • OS / BSP Support : Rt-Linux, VxWorks
  • Protocols & Drivers for USB, Ethernet,..
  • Provision to customize the CPLD logic

Back to top

ISDN Interface board

  • 6 layer with 3U form factor
  • ISDN interface through IPAC controller
  • Linux Host driver with ISDN protocol support

Back to top

OMAP Test Platform

  • Product development including Board Hardware, FPGA and Software
  • TI OMAP 5910 CPU (ARM925 + DSP55x)
  • For the standalone Pattern generation & acquisition application
  • DAC and ADC @ 100MHz, 16 Bit
  • Virtex II Pro FPGA (XC2VP7 and XC2VP20) based variable pattern generator & receiver
  • SMSC LAN 91C111 Ethernet Controller,USB Device
  • Windows 2000 Based Host Platform for the user interface

Back to top

OC48 POS Reference Solution Development

  • CompleteTurnkey reference platform development including board HW, FPGA and SW
  • MPC860 based standalone platform
  • OC48 Framer & complete front end design.
  • UTOPIA / POS-PHY Level 3 Interface between devices and FPGA
  • Wire speed Pattern / CRC generator, checker at OC 48 interface
  • 16 different channels, with independent patterns control in each and bandwidth management
  • Bit Error Rate analysis in the hardware
  • FPGAs of total Three Million gate complexity
  • 14 Layer PCB with the full signal integrity analysis
  • Expansion bus support for future modules addition

Back to top

Pentium-M Switch Features

  • Total Turn-key Platform + FPGA solution
  • Acts as a data switch between multiple processor nodes
  • Pentium4 Processor-M based controller platform
  • Chipsets based on MCH (E7501) and ICH3
  • FPGA based RTL logic and operation
  • For the Dual port RAM and PCI interfaces
  • Based on XC2V3000
  • Onboard DDR memory interfaces
  • High speed board design with all SI requirements

Back to top

VME Bus Based System Interface Board

Asamana-Fep card is a Slave VME interface board based on Cypress's one Slave VME Interface controller, and four bus interface logic circuit, supporting 32-bit address and data transfer. The complete glue logic is incorporated in the Xilinx based CPLD device. This card acts as a slave interface betwen the VME bus and the Asamana board which is based on four 32-bit RISC processors. The interface is established by means of LVDS signals taken through IEC1076 2.0 mm Metric Connectors (One 125 Pin and one 5 Pin).

Back to top

Portable Handheld Terminal

  • IrDA based adapter for payment applications
  • Complete turnkey hardware development for volume production.
  • Micro Controller x51 Based Miniaturized Design.
  • Optimized Power Management for handheld applications
  • Glue logic in Xilinx Cool runner CPLD.

Back to top

FPGA

  • Expertise in Xilinx, Altera & Cypress devices
  • H.110 Interface logic for 4 channel T1/E1 Interface
  • OC48 Pattern generator, receiver and checker logic
  • Packet over Sonet logic including PRBS, FCS, CRC
  • UTOPIA - POS Level 3 Interface
  • NiOS core implementation & core integration
  • SDRAM Controller, Serial port, Keyboard, …Core implementation
  • Memory control & Glue logic implementation for CPCI boards based on MPC8xx, TMS320C620x,…

Back to top

CPLD

  • PCI controller interface for a custom RISC processor
  • Interface logic between ADSL device and DSP processor
  • Portable handheld terminal interface controller
  • A four node Multiprocessor port RAM logic
  • ISDN controller interface with CPCI controller.

Back to top

Copyright © 2008 iWave Systems Technologies Pvt Ltd. All rights reserved.