iWave Japan      Welcome to iWave Systems

i.MX6ULL System On Module for Power Efficient and Cost Optimized Embedded & IoT Apps

iWave’s new SODIMM module encompasses NXP i.MX6ULL ARM Cortex A7 CPU core operating up to 528MHz speed with Linux OS. The new i.MX6ULL SODIMM SOM module is designed to meet the needs of many general embedded applications that require power efficient, high performance and cost optimized solution. The NXP i.MX6ULL applications processor includes an integrated power management module which helps in reducing the complexity of an external power supply and simplifying power sequencing. The module is equipped with NXP/Freescale PF3001 PMIC (Power Management IC) that helps to achieve power optimization.

This cost effective i.MX6ULL board is ultra-compact in size with the form factor of 67.6mm X 29mm. The i.MX6ULL system on module is integrated with on-board PMIC, Flash, DDR3 and dual Ethernet PHY. The i.MX6ULL SOM module is ideally suitable for the cost & power optimized general embedded and industrial applications. The major target applications of this i.MX6ULL module are Industrial HMI & Access Control, Mobile POS, Secure e-commerce, Energy Management, IoT gateway, Industrial control & automation, Medical & Healthcare equipment, White goods and Smart appliances.

The new i.MX6ULL SOM module supports the following features:

  • CPU: NXP/Freescale’s i.MX6ULL Y0, Y1, Y2 ARM Cortex A7 @ 528MHz
  • PMIC: NXP/Freescale’s PF3001
  • Memory:
    • 256MB DDR3 (Expandable to 1GB)
    • 256MB NAND Flash (Expandable to 8GB)
    • 10/100 Ethernet PHY – Up to 2 Ports
    • Micro SD Slot (Optional1)
    • eMMC Flash (Optional1)
    • QSPI Flash (Optional1)

  • SODIMM Edge Connector Interfaces:
    • Debug UART
    • Data UART - 3 Ports
    • CAN - 2 Ports
    • SD(4-Bit) - 1 Port
    • 10/100 Ethernet - Up to 2 Ports2
    • USB OTG - 2 Ports
    • 24bpp RGB Display Port
    • 8Bit Parallel camera port
    • I2S Audio or JTAG
    • I2C - 1 Port
    • PWM - 2 Ports
    • GPIOs
    • Boot Mode Signals

  •  Power Supply:
    • 3.3V @ 1A through SODIMM edge

  • Temperature Supported:
    • 0°C to +70°C Commercial
    • -40°C to +85°C Industrial

  •  OS Support:
    • Linux 4.1.15

  • Form Factor:
    • 67.6mm X 29mm

Note1: At a time either NAND Flash or eMMC & QSPI Flash or micro SD & QSPI flash can be used in the SOM. By default NAND Flash is supported.

Note2: If 2nd Ethernet (ENET2) not used, it can be used as additional 3 UARTs or Keypad 4x4 or RMII Interface.

iWave’s new i.MX6ULL based SODIMM Development Kit helps to evaluate this i.MX6ULL System On Module

More info: i.MX6ULL SODIMM SOM Module

For further information or enquiries please write to mktg@iwavesystems.com or contact our Regional Partners.