iWave Japan      Welcome to iWave Systems

Hardware Design Services

Hardware Design Services

iWave offers system level solutions with VME / VPX based backplanes / Custom backplanes. Our vast in-house expertise in Hardware Board Design Services, Software Development, FPGA Design Services & Mechanical Enclosure Design enables us in providing complete system solutions.

iWave engages in embedded board design services, hardware development solutions based on Embedded Controllers / Processors / DSP that includes Low and High Speed Design, in-house Multilayer PCB Design, Signal integrity & other required analysis and Testing. The PCB Fabrication and Assembly activities are done through our reliable Partners. iWave has proven experience in developing Complex designs compliance to the standard small form factor such as Qseven, Pico ITX, Micro MXM, SODIMM, etc., and also custom design. Also, iWave has vast experience in taking the design from engineering samples to mass production.

PCB Design Capabilities

  • Turnkey PCB Layout 
  • Layer stack up / Placement / Routing / Signal integrity / Gerber Generation:  
    • Number of layers varying from 2 to 30
    • Components Pitch of 0.5mm, 0.65mm, 0.8mm, 1mm, etc.
    • Minimum trace width/separation of 3/3mils 
    • Experience in HDI (High Density Interconnect)-Buried and Blind Vias technology
    • High speed signal routing in the range of 10 Giga bit

Hardware Testing & Certification

iWave has wide range of experience in functional testing of the design with the in-house test facilities. On Customer request, iWave enables to get the product certification through our external approved labs by doing Environment testing like temperature, humidity, vibration, and EMI / EMC, ESD.

Our Strengths

  • Development of Digital, Analog, RF and High Speed design
  • Very minimal / Zero Cuts and Straps in prototyping
  • Design for Manufacturing (DFM), Design for Testability (DFT)
  • Established quality process with our ecosystem partners for volume manufacturing

 

Hardware Design Service Expertise Board Design Service Expertise

Domain

Expertise

Processor/Microcontroller Devices

  • i.MX6x, i.MX6UL, i.MX6 POP, Vybrid, MPC864x, i.MX27, i.MX257, i.MX258, i.MX233, i.MX50, i.MX51,i.MX53, PowerPC 860, 8260, 750/755 from Freescale/NXP
  • Keystone II, DM355/64xx, DSP TMS320C6455, OMAP 3530, AM437x, DM8168, CC2541, OMAP 850 from TI
  • Atom Z5xx from Intel
  • ARMDA/PXA610, MC200, PXA255, PXA270 from Marvell
  • RZ/G1M, SH4 from Renesas
  • AT91RM9200 from Atmel
  • ADSP-TS101S TigerSHARC from Analog Devices 
  • TX4938 Processor from Toshiba 
  • PIC18F85J11 from Microchip
  • STM32

FPGA/CPLD Devices

  • Altera FPGAs : Stratix II, Stratix III, Stratix IV and Stratix V GS, Cyclone II, Cyclone III, Cyclone IV, Cyclone V, Cyclone V SoC, Arria II GX, Arria V GX/GT and Arria V GZ
  • Altera CPLDs : Max II, Max V
  • Xilinx FPGAs: Spartan 3/3E/3A, Spartan 6, Kintex 7 and Virtex 7
  • Xilinx CPLD: CoolRunner-II
  • Lattice: ECP3 and MachXO2
  • Microsemi: ProASIC3, IGLOO, Smart Fusion SoC & Fusion

Memory/Peripherals Interface

  • DDR3, SATA, USB3.0
  • PCIe Gen3, 64Bit PCI
  • Camera (CSI & CSI MIPI), VGA, HDMI, Capacitive Touch support for LCDs, TV IN, Audio, SPDIF
  • High speed ADC and DAC Interface
  • Low power battery based designs

Hardware Tools Used

Schematics Tools

ORCAD V 16.x or above

PCB Cad Tools

Cadence Allegro V16.x or above

Signal Integrity Tools

Hyperlynx 6.0 or above

Gerber data Review Tool

GC Prevue

Debugging Tools

Multimeter, CRO, Logic Analyzer, JTAG Debugger